Effect of Coronal Flaring on Initial Apical File Size Estimation in Curved Canals Using Three Distinct Rotary Instruments: A Comparative In Vitro Study.

BACKGROUND AND OBJECTIVES: The initial size of a root canal is established by progressively introducing K-files according to the increase in the International Organization for Standardization (ISO) size in the apical region. The initial file-fit sensation is caused by coronal interferences rather than always occurring at the apex, as is commonly believed. Flaring the canal at its earliest stages enables the practitioner to accurately assess the size of the canal approaching the apex. This enables more informed judgments on the selection of the master apical file required for shaping and cleaning the apex. The aim of this in vitro study is to examine the impact of cervical flaring on the first estimation of apical file size using three distinct rotary instruments. MATERIALS AND METHODS: Sixty-four extracted permanent maxillary first molars with a curvature of between 10° and 20° were chosen. Conventional access openings were made, and the precise length of the canal was determined, leaving it 1 mm short of the apex. The apical fit was deemed to have materialized when the largest file successfully reached the apex, and further progression beyond that depth was unattainable. An initial file that exhibited tactile resistance both before and following expansion at the designated working length (WL) was observed. The initial file that elicited a sensation of being securely attached was affixed using methacrylate into the root canal. A diamond sectioning disc was used to horizontally cut the apical 0.5 mm of the mesiobuccal root. This was done to expose the canal and the instrument at the WL. The uppermost portions were observed using a 3D optical profilometer, and digital photographs were captured for each sample. RESULTS: The occurrence of coronal interferences and the choice of instruments for flaring had a notable impact on the estimation of the initial apical file (IAF) size. The file size frequency was augmented following flaring using various rotary instruments, namely ProTaper, HyFlex CM, and Endoflare. Group 1, which did not undergo preflaring, exhibited the highest disparity of 257.3 ± 54.4. The variation was substantially different (p<0.01) from all the groups that underwent flaring. The use of HyFlex CM (group 3) for preflaring resulted in the smallest average difference (124.4 ± 29.6) between the maximum diameter of the canal at the apex and the diameter of the initial file used. Endoflare (group 4) exhibited the second lowest mean disparity (178.7 ± 46) between the maximum width of the apical root canal and the diameter of the IAF, with the ProTaper group (211 ± 43.5) following closely behind. Nevertheless, there was no statistically significant discrepancy observed in the average differences between groups 2 and 4 (ProTaper and Endoflare groups, respectively). CONCLUSION: Coronal preflaring significantly contributes to minimizing the variation between the IAF and the diameter of the apical canal. Prior coronal expansion using rotary files enables a more precise identification of the IAF. The choice of equipment used for flaring affects the estimation of the IAF size.

ProSeq4: A user-friendly multiplatform program for preparation and analysis of large-scale DNA polymorphism datasets.

Preparation of DNA polymorphism datasets for analysis is an important step in evolutionary genetic and molecular ecology studies. Ever-growing dataset sizes make this step time consuming, but few convenient software tools are available to facilitate processing of large-scale datasets including thousands of sequence alignments. Here I report "processor of sequences v4" (proSeq4)-a user-friendly multiplatform software for preparation and evolutionary genetic analyses of genome- or transcriptome-scale sequence polymorphism datasets. The program has an easy-to-use graphic user interface and is designed to process and analyse many thousands of datasets. It supports over two dozen file formats, includes a flexible sequence editor and various tools for data visualization, quality control and most commonly used evolutionary genetic analyses, such as NJ-phylogeny reconstruction, DNA polymorphism analyses and coalescent simulations. Command line tools (e.g. vcf2fasta) are also provided for easier integration into bioinformatic pipelines. Apart of molecular ecology and evolution research, proSeq4 may be useful for teaching, e.g. for visual illustration of different shapes of phylogenies generated with coalescent simulations in different scenarios. ProSeq4 source code and binaries for Windows, MacOS and Ubuntu are available from https://sourceforge.net/projects/proseq/.

Assessing the sensitivity and suitability of a range of detectors for SIMT PSQA.

PURPOSE: Single-isocenter multi-target intracranial stereotactic radiotherapy (SIMT) is an effective treatment for brain metastases with complex treatment plans and delivery optimization necessitating rigorous quality assurance. This work aims to assess five methods for quality assurance of SIMT treatment plans in terms of their suitability and sensitivity to delivery errors. METHODS: Sun Nuclear ArcCHECK and SRS MapCHECK, GafChromic EBT Radiochromic Film, machine log files, and Varian Portal Dosimetry were all used to measure 15 variations of a single SIMT plan. Variations of the original plan were created with Python. They comprised various degrees of systematic MLC offsets per leaf up to 2 mm, random per-leaf variations with differing minimum and maximum magnitudes, simulated collimator, and dose miscalibrations (MU scaling). The erroneous plans were re-imported into Eclipse and plan-quality degradation was assessed by comparing each plan variation to the original clinical plan in terms of the percentage of clinical goals passing relative to the original plan. Each erroneous plan could be then ranked by the plan-quality degradation percentage following recalculation in the TPS so that the effects of each variation could be correlated with γ pass rates and detector suitability. RESULTS & CONCLUSIONS: It was found that 2%/1 mm is a good starting point for the ArcCHECK, Portal Dosimetry, and the SRS MapCHECK methods, respectively, and provides clinically relevant error detection sensitivity. Looser dose criteria of 5%/1 mm or 5%/1.5 mm are suitable for film dosimetry and log-file-based methods. The statistical methods explored can be expanded to other areas of patient-specific QA and detector assessment.

An artificial neural network based approach for predicting the proton beam spot dosimetric characteristics of a pencil beam scanning technique.

Utilising Machine Learning (ML) models to predict dosimetric parameters in pencil beam scanning proton therapy presents a promising and practical approach. The study developed Artificial Neural Network (ANN) models to predict proton beam spot size and relative positional errors using 9000 proton spot data. The irradiation log files as input variables and corresponding scintillation detector measurements as the label values. The ANN models were developed to predict six variables: spot size in thex-axis,y-axis, major axis, minor axis, and relative positional errors in thex-axis andy-axis. All ANN models used a Multi-layer perception (MLP) network using one input layer, three hidden layers, and one output layer. Model performance was validated using various statistical tools. The log file recorded spot size and relative positional errors, which were compared with scintillator-measured data. The Root Mean Squared Error (RMSE) values for the x-spot and y-spot sizes were 0.356 mm and 0.362 mm, respectively. Additionally, the maximum variation for the x-spot relative positional error was 0.910 mm, while for the y-spot, it was 1.610 mm. The ANN models exhibit lower prediction errors. Specifically, the RMSE values for spot size prediction in the x, y, major, and minor axes are 0.053 mm, 0.049 mm, 0.053 mm, and 0.052 mm, respectively. Additionally, the relative spot positional error prediction model for the x and y axes yielded maximum errors of 0.160 mm and 0.170 mm, respectively. The normality of models was validated using the residual histogram and Q-Q plot. The data over fit, and bias were tested using K (k = 5) fold cross-validation, and the maximum RMSE value of the K fold cross-validation among all the six ML models was less than 0.150 mm (R-Square 0.960). All the models showed excellent prediction accuracy. Accurately predicting beam spot size and positional errors enhances efficiency in routine dosimetric checks.

To Evaluate Different Endodontic Instrumentation Systems Regarding Post-Operative Pain After Endodontic Therapy: A Clinical Study.

BACKGROUND: Despite substantial breakthroughs in instrumentation systems and pharmaceutical interventions, pain following endodontic therapy remains a serious concern. The effect of the type of endodontic instrumentation system in post-operative pain after endodontic therapy has been a matter of debate. AIM: To evaluate different endodontic instrumentation systems, namely Reciproc (GmbH, Munich), OneShape® (MicroMega, France), Protaper Gold (Dentsply Sirona, USA), and Hyflex® EDM (Coltène/Whaledent Inc., USA) file systems, regarding post-operative pain after endodontic therapy Methods and materials: The endodontic department treated healthy patients aged 20 to 50 years who were experiencing symptoms of irreparable pulpitis in one or more maxillary molars or mandibular molars. Five hundred was the determined size of the sample. The study participants were divided into five categories, each comprising 100 participants. These categories were: Category 1: Reciproc instrumentation system. Category 2: OneShape® instrumentation system. Category 3: ProtaperGold instrumentation system. Category 4: HyFlex® EDM instrumentation system. Category 5: Control (stainless steel K-files). Following endodontic therapy, these scores were recorded at 6 hours, 12 hours, 24 hours, 48 hours, and 72 hours using the VAS scale. RESULTS: The visual analog scale (VAS) score (mean±SD) in the control group was 0.73± 0.40 (<0.001). The VAS score in the Reciproc group was 0.43± 0.05 (<0.001). The VAS score in the OneShape® group was 0.36±0.09 (<0.001). The VAS score in the Protaper Gold group was 0.41 ±0.08 (<0.001). The VAS score in the HyFlex® EDM group was 0.55 ±0.02 (<0.001). The VAS score in all instrumentation techniques at 72 hours follow-up was lesser in comparison to a control group with meaningful statistical significance (<0.001). However, the post-operative pain among the Reciproc, OneShape®, Protaper Gold, and HyFlex® EDM instrumentation systems was not different clinically when compared among themselves. However, VAS values were greater in OneShape® and HyFlex® EDM compared to Reciproc and Protaper Gold, showing increased post-operative pain in OneShape and HyFlex® EDM compared to Reciproc and Protaper Gold. It was also observed that there was a decline in the VAS score in all instrumentation systems as the follow-up period increased from 6 hours to 72 hours, with maximum post-operative pain at 6 hours of follow-up and minimum post-operative pain at 72 hours of follow-up. However, the decline was lesser in OneShape® and HyFlex® EDM in comparison to Reciproc and Protaper Gold, with increased post-operative pain in OneShape® and HyFlex® EDM in comparison to Reciproc and Protaper Gold. CONCLUSION: Post-operative pain at all follow-ups of endodontic procedures was less in Reciproc, OneShape®, Protaper Gold, and HyFlex® EDM than in the control group. VAS scores were higher in the OneShape® and HyFlex® EDM groups compared to the Reciproc and Protaper Gold groups, indicating increased post-operative pain with OneShape® and HyFlex® EDM instruments in comparison to Reciproc and Protaper Gold.

An In Vivo Evaluation of Postoperative Pain after Root Canal Instrumentation Using Manual K-files and Kedo-S Rotary files in Primary Molars.

Aim: To determine postoperative pain after root canal instrumentation using manual K-file and rotary Kedo-S files in primary molars. Material and Method: Thirty-six primary mandibular molars from 4- to 8-year-old children requiring pulpectomy were randomly split into two groups of 18 teeth each, that is, manual file K-file (Group I) and Kedo-S rotary file (Group II). Children's pre- and postoperative pain was assessed using a four-point scale at different time intervals. Results: From the result of the present study, it was observed that the Kedo-S group showed significantly less pain after 24, 48, and 72 h. Conclusion: It was concluded from the present research that patients enrolled in the Kedo-s group experienced less pain.

An In Vitro Comparative Assessment of Shaping Capacity of a Single-File System Over Multiple-File System in Root Canals.

Objectives: The study's objective was to contrast the two distinct rotary file techniques used to shape mandibular first molars. Materials and Methods: The investigation involved twenty recently removed mandibular molars. A digital single-lens reflex (DSLR) camera was placed in a fixed position, a muffle block was built, and images of each tooth's three cross sections were obtained. The specimens were split into the following two groups at random: Rotary files from WaveOne were used to prepare group A and Mtwo rotary files were used to prepare group B. Results: At the coronal, middle, and apical thirds of the root canals, WaveOne file system demonstrated improved centering ability compared with the Mtwo file system (P 0.05). Conclusion: When compared to the Mtwo file system, WaveOne file system demonstrated improved centering capabilities and needed significantly less time to build the curved canals.

Compare the Centering Ability, Canal Transportation and Root Canal Area Increase of XP Endoshaper, Hyflex CM and K3 XF File System by using Cone Beam: An Original Research.

Objective: Using cone beam computed tomography (CBCT), this study compared three rotary file systems-XP Endoshaper, Hyflex CM, and K3 XF-for centering, canal transportation, and root canal area growth. Materials and Methods: The rotating file system randomly separated 60 removed human mandibular molars into three groups (n = 20). Manufacturer-recommended root canal instrumentation was done. Specialized software examined pre- and post-instrumentation CBCT scans. Centering ability was measured by canal transportation and root canal area expansion at different levels from the apex. Results: The Hyflex CM file system had the best centering and the least canal transit at all levels (P < 0.05). XP Endoshaper increased the root canal area the most (P < 0.05). The K3 XF file system had average centering and canal transfer results. Conclusion: The Hyflex CM system centered well, whereas the XP Endoshaper system increased the root canal area the most. The clinical context and therapeutic goals should determine the rotating file system.

Effects of Side Flattening on Torsional and Cyclic Fracture Resistance of Nickel-Titanium File.

INTRODUCTION: The purpose of this study was to evaluate the effect of side flattening of cutting flutes on the cyclic resistance and torsional resistance of nickel-titanium files. METHODS: Both novel flattened Platinum V.EU (PL) and standard non-flattened CC Premium V.EU (CC) rotaries were tested. For cyclic fatigue tests, all the files were rotated in an artificial root canal with a curvature of 45° and a radius of 6.06 mm at 300 rpm (n = 15 in each group). The number of cycles to failure (NCF) was calculated. For torsional tests, the files were rotated at 2 rpm clockwise until fracture occurred. The maximum torque value at fracture was measured and the toughness and distortion angle were computed. Subsequently, five fragments were randomly selected in each experiment, the cross-section and longitudinal direction of the fragments were photographed using a scanning electron microscope. An unpaired t-test was performed at a significance level of 95%. RESULTS: There was a statistically significant difference in NCF between CC and PL (P < .05). CC showed higher NCF than PL. There was no statistically significant difference between CC and PL with regards to the parameters related to torsional resistance (distortion angle, ultimate strength, and toughness) (P > .05). CONCLUSION: Within the limitations of this study, side flattening of the file did not improve cyclic resistance or torsional resistance of the files. As side flattening may reduce a file's cyclic resistance, such files should be used with caution in clinical practice.

Comparative evaluation of the effect of ultrasonic and rotary agitation of herbal irrigating solutions on smear layer: A SEM study.

Context: Instrumentation and irrigation balance helps in effective removal of endodontic microbes housing inside the smear layer. Aim: This study aimed to (1) evaluate whether activation of the irrigating solutions with two different systems during the final irrigation step can lead to smear layer formation in the middle and apical third of the root canal and (2) evaluate and compare the smear layer removal ability of the aqueous extracts of Emblica officinalis and Morinda citrifolia. Materials and Methods: A total of 72 single-rooted teeth were prepared up to F4 ProTaper. The specimens were assigned into eight groups of nine teeth each, according to the final irrigant and activation techniques. Further, the teeth were evaluated under SEM for endodontic smear layer at the middle and apical third. Statistical Analysis: Inferential statistics included Pearson's Chi-square. Level of significance was set at 0.05 at 95% confidence level. Results: Ultrasonic activation system showed significant (P = 0.000) amount of smear layer compared to XP-Endo Finisher file. A significant difference (P = 0.00) in the smear layer removal was observed when 6% M. citrifolia was activated with XP-Endo Finisher file both in the middle and apical third. Conclusion: Within the limitations of this in vitro study, it can be concluded that smear layer formation was noted with ultrasonic and XP-Endo Finisher file when saline was used as an irrigant. 6% M. citrifolia when activated with XP-Endo Finisher file showed best results among all other experimental groups.

When all computers shut down: the clinical impact of a major cyber-attack on a general hospital.

Importance: Healthcare organizations operate in a data-rich environment and depend on digital computerized systems; thus, they may be exposed to cyber threats. Indeed, one of the most vulnerable sectors to hacks and malware is healthcare. However, the impact of cyberattacks on healthcare organizations remains under-investigated. Objective: This study aims to describe a major attack on an entire medical center that resulted in a complete shutdown of all computer systems and to identify the critical actions required to resume regular operations. Setting: This study was conducted on a public, general, and acute care referral university teaching hospital. Methods: We report the different recovery measures on various hospital clinical activities and their impact on clinical work. Results: The system malfunction of hospital computers did not reduce the number of heart catheterizations, births, or outpatient clinic visits. However, a sharp drop in surgical activities, emergency room visits, and total hospital occupancy was observed immediately and during the first postattack week. A gradual increase in all clinical activities was detected starting in the second week after the attack, with a significant increase of 30% associated with the restoration of the electronic medical records (EMR) and laboratory module and a 50% increase associated with the return of the imaging module archiving. One limitation of the present study is that, due to its retrospective design, there were no data regarding the number of elective internal care hospitalizations that were considered crucial. Conclusions and relevance: The risk of ransomware cyberattacks is growing. Healthcare systems at all levels of the hospital should be aware of this threat and implement protocols should this catastrophic event occur. Careful evaluation of steady computer system recovery weekly enables vital hospital function, even under a major cyberattack. The restoration of EMR, laboratory systems, and imaging archiving modules was found to be the most significant factor that allowed the return to normal clinical hospital work.

Morphology of the Physiological Foramen: II. Maxillary and Mandibular Premolars.

INTRODUCTION: Information concerning the anatomy of the physiological foramen is still limited. The aim of this study was to investigate the distance between the physiological and anatomic apex, the shape and diameter of the physiological foramen in maxillary (Mx) and mandibular premolars (Mn). METHODS: The anatomy of the apex of 229 maxillary (first: MxP1; second: MxP2) and 221 mandibular premolars (first: MnP1; second: MnP2) from a mixed Swiss-German population was investigated by means of microcomputed tomography and 3-dimensional software imaging. RESULTS: The following results were obtained in the presence of a main physiological foramen. 1. The distance between the physiological and anatomic foramen was 0.29-0.99 mm (MxP1), 0.21-1.03 mm (MxP2), 0.13-0.8 (MnP1), and 0.15-1.41 (MnP2). 2. The mean narrow and wide diameters of the physiological foramen were 0.19-0.33 mm (MxP1), 0.25-0.42 mm (MxP2), 0.28-0.37 (MnP1), and 0.28-0.40 (MnP2). 3. The most common physiological foramen shape was oval (66.7% MxP1, 89.7% MxP2, 91.8% MnP1, 64.4% MnP2). CONCLUSION: Considering the recommended preparation sizes based on a size corresponding to the friction, that is at the narrowest point in the area of the apical constriction (physiological foramen), and within the limitations of this ex vivo microcomputed tomography study, a final preparation size could be chosen when considering the pertaining morphologic considerations; yet, to a minimum ISO 30 size.

DNA Bloom Filter enables anti-contamination and file version control for DNA-based data storage.

DNA storage is one of the most promising ways for future information storage due to its high data storage density, durable storage time and low maintenance cost. However, errors are inevitable during synthesizing, storing and sequencing. Currently, many error correction algorithms have been developed to ensure accurate information retrieval, but they will decrease storage density or increase computing complexity. Here, we apply the Bloom Filter, a space-efficient probabilistic data structure, to DNA storage to achieve the anti-error, or anti-contamination function. This method only needs the original correct DNA sequences (referred to as target sequences) to produce a corresponding data structure, which will filter out almost all the incorrect sequences (referred to as non-target sequences) during sequencing data analysis. Experimental results demonstrate the universal and efficient filtering capabilities of our method. Furthermore, we employ the Counting Bloom Filter to achieve the file version control function, which significantly reduces synthesis costs when modifying DNA-form files. To achieve cost-efficient file version control function, a modified system based on yin-yang codec is developed.

A scalable MapReduce-based design of an unsupervised entity resolution system.

Traditional data curation processes typically depend on human intervention. As data volume and variety grow exponentially, organizations are striving to increase efficiency of their data processes by automating manual processes and making them as unsupervised as possible. An additional challenge is to make these unsupervised processes scalable to meet the demands of increased data volume. This paper describes the parallelization of an unsupervised entity resolution (ER) process. ER is a component of many different data curation processes because it clusters records from multiple data sources that refer to the same real-world entity, such as the same customer, patient, or product. The ability to scale ER processes is particularly important because the computation effort of ER increases quadratically with data volume. The Data Washing Machine (DWM) is an already proposed unsupervised ER system which clusters references from diverse data sources. This work aims at solving the single-threaded nature of the DWM by adopting the parallelization nature of Hadoop MapReduce. However, the proposed parallelization method can be applied to both supervised systems, where matching rules are created by experts, and unsupervised systems, where expert intervention is not required. The DWM uses an entropy measure to self-evaluate the quality of record clustering. The current single-threaded implementations of the DWM in Python and Java are not scalable beyond a few 1,000 records and rely on large, shared memory. The objective of this research is to solve the major two shortcomings of the current design of the DWM which are the creation and usage of shared memory and lack of scalability by leveraging on the power of Hadoop MapReduce. We propose Hadoop Data Washing Machine (HDWM), a MapReduce implementation of the legacy DWM. The scalability of the proposed system is displayed using publicly available ER datasets. Based on results from our experiment, we conclude that HDWM can cluster from 1,000's to millions of equivalent references using multiple computational nodes with independent RAM and CPU cores.

The Influence of Nickel-Titanium (Ni-Ti) Rotary Instrument Systems on Debris and Smear Layer Formation in Endodontic Procedures: An In Vitro Scanning Electron Microscopy Study.

Background Successful endodontic treatment relies on the effective removal of debris and the prevention of smear layer formation within the root canals. The choice of nickel-titanium (Ni-Ti) rotary instrument systems can significantly impact these outcomes. Aim This study aims to evaluate and compare the debris and smear layer formation in root canals of extracted mandibular second premolar teeth following instrumentation with the ProTaper Universal (Dentsply Sirona, Charlotte, NC) (Group II), Twisted File (Kerr Endodontics, Gilbert, AZ) (Group III), and XP Endo (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (Group IV) Ni-Ti rotary instrument systems. Methods In this in vitro study, 60 extracted mandibular second premolar teeth were randomly divided into four groups, each containing 15 teeth. Group I served as the control with no instrumentation. Groups II, III, and IV were instrumented with the ProTaper Universal rotary file, the Twisted File, and the XP Endo file systems, respectively. Debris and smear layer formation were evaluated through scanning electron microscopy (SEM), and photomicrographs were scored using a standardized index. Results Group II (ProTaper) exhibited the highest mean debris and smear layer scores, with values of 3.50 and 2.70, respectively. Group IV (XP Endo) demonstrated the least debris and smear layer formation, with mean scores of 2.65 and 2.08, respectively. Statistical analysis confirmed significant differences among the groups for both debris and smear layer formation. Conclusion The results highlight the practical importance of selecting appropriate Ni-Ti rotary instrument systems to minimize debris and smear layer formation during endodontic procedures. The XP Endo file system showed promise as a favorable choice in this regard, but further clinical research is needed to validate these findings.

What's in a Name? Replacing Pejorative Terminology in Anatomic Pathology.

Recent changes to medical terminology and nomenclature have made strides to improve ethical integrity in healthcare. Removing tarnished eponymous namesakes and depreciative descriptions from the medical lexicon is a challenging, but righteous undertaking. In this article, the authors propose replacing the pejorative histologic description of "Indian file" with "Tusken Raider file."

The Use and Reprocessing of Endodontic Files in Saudi Arabia: A Cross-Sectional Study.

Objectives This study aimed to assess the awareness, implementation, and compliance with the infection control policy recommended by the Saudi Ministry of Health (MOH) for the use and reprocessing of endodontic files and to examine the association between compliance and gender, experience, clinical ranks, and workplace sector. Methods This was a cross-sectional study conducted using a validated self-administered electronic questionnaire created and distributed to dentists who perform endodontic treatment in Saudi Arabia. Data were collected between June and July 2023. Descriptive statistics were reported as counts and percentages. Comparisons among the demographic groups were done using the Kruskal-Wallis and Mann-Whitney tests. Results A total of 402 dentists completed the survey. The results showed that 76.1% (n=306) of respondents claimed that they were aware of the infection control policy recommended by the Saudi MOH for the use and reprocessing of endodontic files in dental clinics. Only 13.2% (n=53) of dentists used single-use endodontic files, and 36.6% (n=147) did not use an endodontic box in their dental clinics. The most commonly reported method of tracing the number of uses of endodontic files was to write the ID of the patient or the number of uses on the sterilization pouch as reported by 37.6% of participants (n=151). The average compliance score percentage was 63.5 ± 16.7. Most of the respondents showed moderate to high levels of compliance (51.7% (n=208) and 42.0% (n=169) of dentists, respectively). Dentists with less than 5 years of experience showed significantly less compliance than dentists with more than 10 years of experience (p = 0.005). Gender, clinical rank, and workplace sector were not significantly associated with the extent of adhering to the evaluated infection control policy. Conclusions Our findings indicate a relatively high level of compliance with the Saudi MOH policy of using and reprocessing endodontic files. However, critical measures such as the single-use of endodontic files, sterilizing new endodontic files, and using the sterilized endodontic box for each patient need improvement. Hence, this study recommends enhancing awareness through continuous education and training.

Reduction of NIFTI files storage and compression to facilitate telemedicine services based on quantization hiding of downsampling approach.

Magnetic resonance imaging is a medical imaging technique to create comprehensive images of the tissues and organs in the body. This study presents an advanced approach for storing and compressing neuroimaging informatics technology initiative files, a standard format in magnetic resonance imaging. It is designed to enhance telemedicine services by facilitating efficient and high-quality communication between healthcare practitioners and patients. The proposed downsampling approach begins by opening the neuroimaging informatics technology initiative file as volumetric data and then planning it into several slice images. Then, the quantization hiding technique will be applied to each of the two consecutive slice images to generate the stego slice with the same size. This involves the following major steps: normalization, microblock generation, and discrete cosine transformation. Finally, it assembles the resultant stego slice images to produce the final neuroimaging informatics technology initiative file as volumetric data. The upsampling process, designed to be completely blind, reverses the downsampling steps to reconstruct the subsequent image slice accurately. The efficacy of the proposed method was evaluated using a magnetic resonance imaging dataset, focusing on peak signal-to-noise ratio, signal-to-noise ratio, structural similarity index, and Entropy as key performance metrics. The results demonstrate that the proposed approach not only significantly reduces file sizes but also maintains high image quality.

Microplastics may induce food dilution and endocrine disrupting effects in fathead minnows (Pimephales promelas), and decrease offspring quality.

Microplastics are a complex environmental contaminant that have been reported to cause a variety of impacts, although the mechanism of these impacts remains unclear. Many studies have investigated either sub-organismal or apical endpoints, while very few have attempted to integrate and link endpoints seen at multiple levels of organization. Here, we exposed fathead minnows to microplastics for their entire lifecycle, from the egg stage through to reproduction, and raised a subset of the offspring in clean water. We show that both preconsumer and environmentally sourced microplastics impact adult growth, lipid storage, and external colouration, suggesting a potential food dilution effect. Environmentally sourced microplastics, but not preconsumer microplastics, had further endocrine disrupting impacts on the parental generation and their offspring in the low concentration treatments such that egg production began later, eggs were less viable, and the offspring had higher rates of malformation. Low dose effects are a typical dose-response for endocrine disrupting contaminants. These results suggest that microplastic exposure, at concentrations relevant to what is being found in the environment, has potential implications for forage fish populations. Our findings also highlight the importance of using an integrative approach to understanding the mechanisms behind how and why microplastics impact organisms.

Identification and expression analysis of ATP-binding cassette (ABC) transporters revealed its role in regulating stress response in pear (Pyrus bretchneideri).

BACKGROUND: ATP-binding cassette (ABC) transporter proteins constitute a plant gene superfamily crucial for growth, development, and responses to environmental stresses. Despite their identification in various plants like maize, rice, and Arabidopsis, little is known about the information on ABC transporters in pear. To investigate the functions of ABC transporters in pear development and abiotic stress response, we conducted an extensive analysis of ABC gene family in the pear genome. RESULTS: In this study, 177 ABC transporter genes were successfully identified in the pear genome, classified into seven subfamilies: 8 ABCAs, 40 ABCBs, 24 ABCCs, 8 ABCDs, 9 ABCEs, 8 ABCFs, and 80 ABCGs. Ten motifs were common among all ABC transporter proteins, while distinct motif structures were observed for each subfamily. Distribution analysis revealed 85 PbrABC transporter genes across 17 chromosomes, driven primarily by WGD and dispersed duplication. Cis-regulatory element analysis of PbrABC promoters indicated associations with phytohormones and stress responses. Tissue-specific expression profiles demonstrated varied expression levels across tissues, suggesting diverse functions in development. Furthermore, several PbrABC genes responded to abiotic stresses, with 82 genes sensitive to salt stress, including 40 upregulated and 23 downregulated genes. Additionally, 91 genes were responsive to drought stress, with 22 upregulated and 36 downregulated genes. These findings highlight the pivotal role of PbrABC genes in abiotic stress responses. CONCLUSION: This study provides evolutionary insights into PbrABC transporter genes, establishing a foundation for future research on their functions in pear. The identified motifs, distribution patterns, and stress-responsive expressions contribute to understanding the regulatory mechanisms of ABC transporters in pear. The observed tissue-specific expression profiles suggest diverse roles in developmental processes. Notably, the significant responses to salt and drought stress emphasize the importance of PbrABC genes in mediating adaptive responses. Overall, our study advances the understanding of PbrABC transporter genes in pear, opening avenues for further investigations in plant molecular biology and stress physiology.